Box Building

I made my assebly line and started by routing the lip that the drivers will sit on. The woofers i used a half inch straight cutting bit in the router. The Tweeter needed a larger lip. So i used a three quarter inch bit.

Once the lip is cut on all the boxes i started cutting the inner hole out. This can be done with a jig saw, but i prefer the accuracy of the router with a small quarter inch bit.

I really like the overall dimensions of this two way book shelf speaker.

I still need to route out the vent holes for each box. Once i get the vent holes in and vent tube installed it will be time to start measuring the speakers with Soundeasy.